The Geophysical Laser Altimeter is a modified Universal Laser Sensor for use in magnetic environments. The back panel has been replaced with one that has no metal connectors and all fasteners have been replaced with brass. The standard housing is anodized aluminum. One cable with flying leads or a DB9 connector comes out of the back panel. This cable contains power and signal.
|
Measurement laser:
|
| Wavelength: |
905 nm (infrared) |
| 3 power settings: |
400 nJ, 200 nJ and 100 nJ per pulse |
| Average power: |
proportional to laser pulse firing rate |
| Eye safety: |
Class I, 7mm (FDA, CFR21)
Class I M (IEC 60825-1:2001) |
| Beam divergence: |
3 milliradians (~ 0.3 m @ 100 m) |
|
Aiming laser (for alignment only):
|
| Wavelength: |
650 nm (visible red) |
| Eye safety: |
Class IIm (FDA, CFR21) |
| Activation: |
software controlled |
| Average output power: |
1mW |
|
Accuracy:
|
| Non-cooperative target: |
+/- 2 cm typical |
| Cooperative target: |
+/- 1 cm typical |
|
Max. range (high power):
|
| 90% target reflectivity: |
450m |
| 20% target reflectivity: |
225m |
| Cooperative target: |
1664m |
|
Optical sighting scope (optional):
|
| Zoom: |
1.5-4 x 16 |
|
Input power:
|
| Absolute min/max: |
10 - 30V DC |
| Nominal: |
12 - 24V DC |
| Max. current: |
170 mA |
|
Communications:
|
| Serial interface: |
RS232, RS485 |
| Analog output: |
4-20 mA (convert to voltage) |
| Cable: |
one cable out of back panel with flying leads or DB9 connector.
Custom cable lengths available. |
|
Physical:
|
| Dimensions: |
5.3" L x 4.75" W x 2.5" H / (13.5 cm x 12 cm x 6.3 cm) |
| Weight: |
1.75 lbs (800 g) |
| Enclosure: |
anodized Aluminum |
| Mounting: |
75 mm hole spacing front/back and 110 mm spacing side/side (four hole pattern) |
|
Environmental:
|
| Sealing: |
IP 54 |
| Temperature: |
-22° F to +140° F (-30° C to +60° C) |
| Shock/vibration: |
MIL-STD-810E |
